Monster Hunter Wilds (MHW) features stunning graphics and engaging gameplay. But most PC gamers are going through the agony of technical problems, such as startup crashes, server connection crashes, and the notorious Fatal D3D errors. If you’re experiencing these crashes, then this guide is for you with working solutions to fix the Fatal D3D error in Monster Hunter Wilds on Windows PC.
Common Fatal D3D Errors in Monster Hunter Wilds
PC players experience Monster Hunter Wilds crashing in the middle of a game with the following Fatal D3D error messages:
- Fatal D3D error (26, DXGI_ERROR_DEVICE_RESET, 0x887a0007)
- Fatal D3D error (25, DXGI_ERROR_DEVICE_HUNG, 0x887a0006)
- Fatal D3D error (6, E_OUTOFMEMORY, 0x8007000e)
The errors can result from issues such as GPU overclocking, lack of virtual memory, unlocked FPS, and other system issues. Use these fixes to end the Fatal D3D error and continue hunting.
Fix #1 – Run Monster Hunter Wilds with DirectX 11
The game’s DirectX 12 implementation can cause crashes, particularly the DXGI_ERROR_DEVICE_HUNG error. Since MHW supports DirectX 11, you can force it to use DX11 for stability.
- Steps to Force DirectX 11 in Monster Hunter Wilds:
- Open Steam Library and right-click on Monster Hunter Wilds.
- Select Properties.
- In the General tab, type -force-d3d11 under Launch Options.
- Start the game.
This should fix the Fatal D3D error and stabilize.
Fix #2 – Virtual Memory Increase
The E_OUTOFMEMORY Fatal D3D error happens when there is insufficient virtual memory. Manually increasing virtual memory will resolve the issue.
How to Increase Virtual Memory:
- Open Windows Settings > System > About > Advanced System Settings.
- Click Settings under Performance, then navigate to the Advanced tab.
- Click on Change under Virtual Memory.
- Deselect Automatically manage paging file size for all drives.
- Choose a drive with a minimum of 32GB free space.
- Select Custom size, and enter:
- Initial size: 16,384
- Maximum size: 32,768
- Click OK and reboot your PC.
Now start MHW and see if the error is gone.
Fix #3 – Run MHW in Windows 8 Compatibility Mode
Windows 10 or 11 compatibility problems may lead to Monster Hunter Wilds crashing. Playing the game in Windows 8 compatibility mode will resolve this.
- How to Enable Windows 8 Compatibility Mode:
- Open Steam Library and right-click on Monster Hunter Wilds.
- Hover over Manage and click on Browse Local Files.
- In the game directory, right-click the game executable and choose Properties.
- Switch to the Compatibility tab and mark Run this program in compatibility mode for:
- Choose Windows 8 and click on Apply changes.
Now open the game and see if the Fatal D3D error is gone.
Fix #4 – Underclock Graphics Card or Use Debug Mode
Monster Hunter Wilds may crash due to high GPU clock speeds. Some users have resolved this problem by underclocking their GPU.
How to Underclock Your GPU Using MSI Afterburner:
- Download and install MSI Afterburner.
- Reduce the GPU clock speed by 300 MHz.
- Apply the settings and play the game.
For Nvidia GPU Users – Enable Debug Mode:
- If you have an Nvidia GPU, you can use Debug Mode rather than underclocking manually.
- Open Nvidia Control Panel.
- Click on Help at the top menu.
- Choose Debug Mode.
This forces the GPU to operate at Nvidia’s reference clocks, avoiding Fatal D3D errors.
Fix #5 – Limit Monster Hunter Wilds’ Max Frame Rate
Unlocked FPS can make the game unstable. Frame rate capping lowers GPU load and avoids crashes.
How to Limit FPS Using Nvidia Control Panel:
- Open Nvidia Control Panel.
- Navigate to Manage 3D Settings.
- Click on Program Settings and choose Monster Hunter Wilds.
- Turn on Max Frame Rate and set a suitable value (e.g., 60 FPS).
How to Limit FPS Using Nvidia App:
- Open Nvidia App and navigate to Graphics.
- Choose Monster Hunter Wilds.
- Scroll down to Max Frame Rate, turn it on, and enter a value.
Helpful Tip:
To get the best results, set the Max Frame Limit to 1/2, 1/3, or 1/4 of your monitor’s refresh rate except when using a FreeSync or G-Sync monitor.
Fix #6 – Modify Windows Timeout Detection and Recovery (TDR)
Windows TDR resets the GPU driver when it hangs, usually resulting in Fatal D3D errors. Modifying TDRLevel and TDRDelay may help.
How to Modify TDRLevel:
- Open regedit in the administrator account.
- Navigate to HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\GraphicsDrivers.
- Right-click on the right panel and go to New > DWORD (32-bit) Value.
- Name the new file TdrLevel.
- Open TdrLevel, click Modify, and input 0 for the value.
- Restart your computer.
How to Change TDRDelay:
- Open regedit as an administrator.
- Go to HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\GraphicsDrivers.
- Right-click in the right panel and choose New > DWORD (32-bit) Value.
- Name the new file TdrDelay.
- Open TdrDelay, click Modify, and enter 10 as the value.
- Restart your computer.
Final Thoughts
By implementing these fixes, you should be able to fix the Monster Hunter Wilds Fatal D3D errors and have seamless gameplay. If you’re still having trouble, be sure to check out our [fixes hub] for general game errors and fixes on PC and handhelds. Happy hunting!
